Figure 23. PONTE FMQuadro™ window
The Network Topology section shows:
• A stylized bridge network connection between the two Cisco FM
Ponte kit units.
• The operating frequency and channel width of the two units.
The Wireless Statistics section shows real-time values for each of the
following:
• Signal Strength: The current signal level being received, in dBm.
• Link Error Rate: The percentage of packet re-transmissions due to
transmission errors.
• Packet Error Rate: The percentage of packets dropped due to
excessive transmission errors.
• Current TX Rate: The current link transmission rate, in Mb/s.
• TX Throughput: Rate of successful message transmission by the
unit over the wireless link.
• RX Throughput: Rate of successful message reception by the unit
over the wireless link.
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 53 of 132
To Next Page
Loading...
