2. Disable proxy connections by un-checking the check
boxes for the following options:
• Automatically detect settings
• Use automatic configuration script
• Use a proxy server for your LAN
3. Click the OK button.
4. Enter your user name and password in the device login
window, and press 'Enter'.
10. To ensure system security, change the default password when
the installation is completed. If the Sign in window does not
appear, refer to “Changing the Administrator username and
password” (page 85).
7.3. Using the MeshWizard™ configuration wizard
The Cisco FM Ponte kit is equipped with a configuration wizard that allows
fast, easy configuration of the unit.
As an alternative to full configuration, the wizard can be completed before
the first time the unit is used. If needed, the wizard settings can also be
modified at any time after initial unit setup.
Open the Configuration Wizard by doing the following steps:
1. Connect the computer to be used for configuration directly to
the Cisco FM Ponte kit as shown in “Accessing the Cisco FM
Ponte kit for device configuration” (page 37).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 41 of 132
To Next Page
Loading...
