Table 4: Headset Audio Notifications
Audio PromptAction
"Battery charge: high."The headset battery has more than 15 hours of talk time.
"You have [X] hours of talk time remaining.The headset battery has less than 15 hours of talk time.
"You have an incoming call."You have an incoming call.
"Muted."You press the Mute button while on a call.
"Unmuted."You unmute your headset while on a call.
"You are muted."You speak while your headset is muted on a call.
"Connected."Your headset connects with a Bluetooth source
"Disconnected."Your headset disconnects from the first Bluetooth source
"Busy Light on."You hold the Play button without an active call.
"Busy Light off."You hold the Play button to deactivate the Presence LED
light.
"Call rejected."You reject a call with the Call button.
"Pairing mode. Look for Cisco Headset 730 in
your list of Bluetooth devices."
The headset is in pairing mode.
"Headset on."You turn the headset on.
"Headset off."You turn the headset off.
"Keep holding the Bluetooth button to erase all
Bluetooth device records."
You are erasing all Bluetooth devices.
"Bluetooth records erased."You erase the headset Bluetooth memory.
"Desk phone connected"Your headset connects to a Cisco IP Phone
"Desk phone disconnected"Your headset disconnects from a Cisco IP Phone
"Cisco USB Adapter connected"Your headset connects to the USB Adapter
"Cisco USB Adapter disconnected"Your headset disconnects from the USB Adapter
"Computer connected"Your headset connects to a computer
"Computer disconnected"Your headset disconnects from a computer
"Mobile phone connected"Your headset connects to a mobile phone
"Mobile phone disconnected"Your headset disconnects from a mobile phone
"Device connected"Your headset connects to an unknown device
Cisco Headset 730 User Guide
14
Your Headset
About Audio Notifications
To Next Page
Loading...
