Customize Your Headset Equalizer Settings
You can customize the blend of bass and treble in your headset audio with the Cisco Headsets mobile app.
Choose from a number of preset audio settings including Voice, Music, and Cinema.
Procedure
In the Cisco Headsets app, tap Equalizer to switch between audio presets.
Smart Sensors
The Cisco Headset 730 smart sensors detect when you put on or take off your headset. When your smart
sensors are enabled, you can pause your music playback or mute a call when you take off your headset. You
can also answer an incoming call when you pick up your headset.
You can toggle some or all of these settings in the following places:
• The Cisco Headsets mobile app
• A compatible Cisco IP Phone (phone firmware 12.8(1) or later)
• On Cisco Jabber for Windows or Mac (version 12.9 or later)
Smart sensors are On by default on Cisco IP Phones and in Cisco Jabber. In the Cisco Headsets app, smart
sensors are Off by default.
Note
Customize Your Smart Sensors
You can customize your headset smart sensor behavior in the Cisco Headsets app.
Procedure
Step 1 In the Cisco Headsets app, go to Settings > General.
Step 2 Select which smart sensor features you want to turn on or off.
Reset Your Headset Settings
You can restore your default headset settings with the Cisco Headsets mobile app.
Cisco Headset 730 User Guide
29
Music Playback and Audio Settings
Customize Your Headset Equalizer Settings
To Next Page
Loading...
Need help?
General
