Cisco IR829 User Manual

2-4
Cisco IR829 Integrated Services Router Hardware Installation Guide
Chapter 2 Installing the Router
Installing the Router
Warning Hot surface. Statement 1079
Note High Temperature SIMs are required for 4G operations if the Ambient temperature is above 95F (35C)
To access the SIM card in the Cisco IR829, follow these steps:
Step 1 Place the router on its bottom and ensure that any installed antennas are carefully oriented.
Step 2 Remove the SIM access panel using two Phillips head screws. (See Figure 2-1.)
Step 3 Locate the SIM card you wish to install/replace. Details are shown in Figure 2-2.
Step 4 Remove the SIM card (if present) and install the new card(s).
Figure 2-1 Accessing the SIM Cards
Figure 2-2 Sim Card Detail
1. Reset Switch
2. Mini USB Port
3. Dual Sim Slots
Step 5 Replace the panel and the screws.

Cisco IR829 Specifications

General

Serial Interfaces	1 x RS-232
USB Ports	1 x USB 2.0
Wireless	802.11a/b/g/n
Product Type	Router
Form Factor	Rack-mountable
Connectivity Technology	Wired, Wireless
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
WAN Ports Qty	2
LAN Ports Qty	4
Cellular Protocol	LTE
Memory	2 GB DDR3
WAN Interfaces	2 x Gigabit Ethernet
LAN Interfaces	4 x 10/100/1000 Ethernet
Operating Temperature	-20 °C to 60 °C
Processor	1.2 GHz