Cisco MDS 9000 Configuration Guide

Send documentation comments to mdsfeedback-doc@cisco.com
Fabric Manager Client Quick Tour
A-3
Cisco MDS 9000 Family Fabric Manager Quick Configuration Guide
OL-7765-02
Note As of Cisco MDS SAN-OS Release 2.1(1a), advanced mode is enabled by default and provides the full
suite of Fabric Manager features, including security, IVR, iSCSI, and FICON. Uncheck the Advanced
check box in the upper right corner of Fabric Manager Client to simplify the user interface. In this mode,
you can access the basic MDS 9000 features like VSANs, zones, and interfaces.
Multiple Fabrics in the Fabric Pane
You can display multiple fabrics in the same fabric pane (see Figure A-2). The tabs displayed at the
bottom of the screen represent the various fabrics in your setup. You can access the fabrics by clicking
the cloud icon .
Figure A-2 Displaying Multiple Fabrics
Note The same username and password must be used to log into multiple fabrics.
1 All Fabrics tab (selected), showing two fabrics.
2 The Fabric view tab for fabric sw172-22-46-223.
3 The Fabric view tab for fabric sw172-22-46-153.

Cisco MDS 9000 Specifications

General

Brand	Cisco
Model	MDS 9000
Category	Switch
Language	English