Cisco Meraki MR36H - Attach MR36 H to Cradle

31/01/2022, 19:00
MR36H Installation Guide - Cisco Meraki
https://documentation.meraki.com/MR/MR_Installation_Guides/MR36H_Installation_Guide
13/21
ttac t e 36 to t e ou t C ad e
To attach the MR36H to the mount cradle properly, line up the top edge of the AP with the top tab of the mount
cradle. Since the cradle is already mounted to the wall, guide the MR36H towards the top tab and insert the top
tabs into the MR36H’s slot.

Then adjust the MR36H to guide the MR36H’s bottom slot into the cradle’s bottom tab until it clicks into place.
Once in place, the MR36H should be secured to the cradle by using one of the included screws in the cradle’s
bottom tab.

How can we help you?
