Choose Your Mounting Location
A good mounting location is important to getting the best performance out of your MR36H access point. Keep
the following in mind:
1. The device should have an unobstructed line of sight to most coverage areas for highest performance.
2. Power over Ethernet supports a maximum cable length of 360 ft (100 m).
Install the MR36H
For most mounting scenarios, the MR36H mount cradle provides a quick, simple, and flexible means of mounting
your device. The installation should be done in two steps. First, install the mount cradle to your selected
location. Then, attach the MR36H to the mount cradle.
Attach the mount cradle
The MR36H can be mounted to a 4” square cable junction box and European outlet boxes (mounting screws are
not included).
Using appropriate mounting hardware for your specic type of junction box, attach the mount cradle to the
junction box.
Attach the MR36H to the Mount Cradle
To Next Page
Loading...
