LAN Access Ports
The MR36H features 3x LAN ports labeled 1 through 3. Port 1 may provide 802.3af out to an end device if the
MR36H is powered via a 802.3at power source. Conguration details can be found in the AP port proles
article.
The LAN ports on an MR36H behave like access ports on a switch, and will not accept incoming trafc if it has a
VLAN (802.1q) tag applied.
Connecting another MR to the LAN ports of the MR36H is not a supported topology.
Through MR-4072 we learnt that if another MR is connected to the LAN port of an MR36H, DHCP requests
from that MR will not be forwarded from the LAN ports, this is designed as such to prevent erroneous mesh
topologies from forming.
To Next Page
Loading...
