Cisco Meraki MS120-8 Series User Manual

• The equipment should be stored in its original packaging in a room protected from atmospheric precipitation. The
permissible temperature and humidity ranges during storage are specified in the Operation (Installation) Manual.
• Transportation of equipment should be carried out in the original packaging in covered vehicles by any means of
transport. The temperature and humidity during transportation must comply with the permissible established ranges
of temperature and humidity during storage (in the off state) specified in the Operation Manual (Installation).
For additional information on Meraki hardware and for other installation guides, please refer to documentation.meraki.com.
8
All manuals and user guides at all-guides.com

Cisco Meraki MS120-8 Series Specifications

General

Model	MS120-8
Uplink Ports	2 x 1G SFP
Switching Capacity	20 Gbps
Power over Ethernet (PoE)	No
Total Non-Blocking Throughput	10 Gbps
Forwarding Rate	14.88 Mpps
Stacking	No
Layer	Layer 2
Operating Temperature	32°F to 104°F (0°C to 40°C)
Power Consumption	10W (typical)
Management	Cloud-managed
Mounting	Desktop
L2 MAC Address Table	8000 entries
VLAN Support	Yes
QoS	Yes
Security Features	802.1X, DHCP snooping
Power Supply	External AC Adapter
Ports	8 x 1G