Cisco Meraki MS225 Series Setup Instruction

Models
Model number Description
MS225-24-HW Layer-3 24-port Gigabit Ethernet switch with 4 SFP interfaces
MS225-24P-HW Layer-3 24-port Gigabit Ethernet 370W PoE switch with 4 SFP interfaces
MS225-48-HW Layer-3 48-port Gigabit Ethernet switch with 4 SFP interfaces
MS225-48LP-HW Layer-3 48-port Gigabit Ethernet 370W PoE switch with 4 SFP interfaces
MS225-48FP-HW Layer-3 48-port Gigabit Ethernet 740W PoE switch with 4 SFP interfaces
Ratings
Model Power Altitude Temperature
MS225-24-HW 100-240V~, 1.5A-0.85A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-24P-HW 100-240V~, 8-4A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48-HW 100-240V~, 1.5A-0.85A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48LP-HW 100-240V~, 8-4A, 50-60Hz 2000m 45℃
℃℃
℃
MS225-48FP-HW 100-240V~, 12-6A, 50-60Hz 2000m 45℃
℃℃
℃

Cisco Meraki MS225 Series Specifications

General

Model	MS225 Series
Series	MS225
Category	Switch
Stacking	Yes, via Meraki Cloud
Power Supply	Internal
Layer	Layer 2
DRAM	512 MB
Operating Temperature	0°C to 40°C
Uplink	4 x SFP+
Management	Cloud Managed
Switching Capacity	176 Gbps
Forwarding Rate	131 Mpps
Total PoE Budget	740W (MS225-48FP)
Dimensions (W x D x H)	17.3 x 10.2 x 1.7 in (440 x 260 x 44 mm)
Ports	24 x GbE or 48 x GbE
Power over Ethernet (PoE)	802.3af/at (PoE/PoE+)