1 Power Solid orange
Switch is unable to
connect to the Meraki
cloud
Flashing green
Firmware upgrade in
process
Solid green
Switch is fully
operational and
connected to the
Meraki cloud
Off
Switch does not have
power
2 Restore N/A
Restore button to clear
switch IP and local
configuration settings
3 Switch Ports Off No client connected
Solid orange
Link operating at 10/
100 Mbps
Solid green
Link operating at 1000
Mbps
In addition, there is a RESTORE button available on the front panel.
Insert a paper clip if a restore is required.
• A brief, momentary press: To delete a downloaded configuration and reboot.
• Press and hold for more than 10 sec: To force the unit into a full factory restore.
3
To Next Page
Loading...
