Cisco MS220-24/48 Series

RPS power supply matrix
Switch Model Full power load, [switch only / including PoE]
MS220-24 18 W / not applicable
MS220-24P 77 W / 447W
MS220-48 51 W / not applicable
MS220-48LP 135 W / 505 W
MS220-48FP 163 W / 903 W
Example configurations
Example 1: "I have 3 x MS220-24 and 3 x MS220-48 switches connected to my RPS2300"
3 x 18W = 54W
3 x 51W = 153W
54W + 153W = 207W total power draw
Recommended hardware:
1 x PWR-RPS2300
1 x C3K-PWR-750WAC (750W) OR 2 x C3K-PWR-750WAC (750W) for redundancy
6 x CAB-RPS2300-E=
Example 2: I have 6 x MS220-24P switches connected to my RPS2300. I also intend to use the full PoE budget of
370W on each switch and want to back it up in case of a failure.
6W x 447W = 2683W total power draw
Recommended hardware:
5