MS220 Series back panel
Power input Power cords may be ordered separately.
RPS2300 Redundant Power Supply (Optional)
The MS220-24 series supports connecting the Cisco RPS2300 for optional power redundancy. MS220-24 series models
support failover and reversion to main power once it has been restored. The following Cisco part numbers are
supported:
Part number Description
PWR-RPS2300 RPS Chassis
C3K-PWR-750WAC 750W RPS Power supply (see recommendations)
C3K-PWR-1150WAC 1150W RPS Power supply (see recommendations)
CAB-RPS2300-E= RPS 22-pin cable
Equipment is to be used only in a restricted access location and installed/operated only by trained service
personnel.
4
To Next Page
Loading...
