12-Port 10GE with SFP+
The 12-port 10GE MPA (NC55-MPA-12T-S) provides 12 ports for SFP+ transceivers.
ATTN LED3STATUS LED1
SFP+ ports and LEDs2
4-Port 800GE MPA with QSFP28/QSFP-DD
Table 3: Feature History Table
DescriptionRelease InformationHardware
This release introduces a 4-port
800GE modular port adapter
(NC57-MPA-2D4H-S) that
supports QSFP28 and QSFP-DD
optical transceivers. This MPA is
supported in the NCS-55A2-MOD
and NCS-57C3-MOD routers. This
is the first modular port adapter to
support the QSFP-DD optical
transceiver.
For port configuration details, see
the "4-Port 800GE MPA with
QSFP28/QSFP-DD" section in
4-Port 800GE MPA with
QSFP28/QSFP-DD and Hardware
Installation Guide for Cisco NCS
5700 Series Fixed-Port Routers.
Release 7.4.1NC57-MPA-2D4H-S modular port
adapter
The NC57-MPA-2D4H-S modular port adapter supports QSFP28 and QSFP-DD optical transceivers in the
following configurations:
Hardware Installation Guide for Cisco NCS 5700 Series Fixed-Port Routers
9
NCS 5700 Router Overview
Modular Port Adapters