To Next PageTo Next Page
Need help?Do you have a question about the Cisco Network Device Cisco 2800 and is the answer not in the manual?
General| Product Type | Router |
|---|---|
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet |
| Power Source | AC power supply |
| Humidity Range Operating | 10% to 85% non-condensing |
| Product Series | Cisco 2800 |
| Network/Transport Protocol | IP |
| Remote Management Protocol | SNMP, HTTP, HTTPS, Telnet |
| Features | Firewall protection, VPN support, Quality of Service (QoS) |
| Operating Temperature | 0 to 40 °C |
| WAN Interface | T1/E1, Serial |
| Routing Protocols | BGP, OSPF, EIGRP, RIP |
| Security Features | Firewall, VPN |
| Total Number of Ports | Varies by model |
Explains the purpose and scope of the hardware documents for Cisco 2800 series routers.
Describes the intended reader for the Cisco 2800 series hardware documentation.
Lists the various topics addressed in the Cisco 2800 series hardware documentation.
Explains the document conventions used in the Cisco 2800 series hardware manuals.
Provides important safety warnings for handling Cisco 2800 series router equipment.
Lists other Cisco documents relevant to the 2800 series routers.
Details the warranty terms and services applicable to Cisco 2800 series hardware.
Guides users on how to obtain Cisco documentation and additional literature.
Provides information on submitting comments and feedback regarding Cisco documentation.
Explains how to get technical support from Cisco for Cisco 2800 series routers.
Lists sources for additional Cisco product information and resources.
Describes the basic features of Cisco 2800 series routers, including identification and built-in components.
Shows the location of the serial number label on Cisco 2800 series routers.
Summarizes the interface ports that are built into the chassis of Cisco 2800 series routers.
Summarizes optional modules that can be installed or removed from Cisco 2800 series routers.
Details the types of memory (DRAM, Boot/NVRAM, Flash) used in Cisco 2800 series routers.
Summarizes the power options available for Cisco 2800 series routers.
Describes the LED indicators on the front and rear panels of Cisco 2800 series routers.
Explains the fan systems used for chassis cooling in Cisco 2800 series routers.
Describes the real-time clock and battery backup feature in Cisco 2800 series routers.
Shows front and back panel views of the Cisco 2801 router chassis.
Shows front and rear panel views of the Cisco 2811 router chassis.
Shows front and rear panel views of the Cisco 2821 and Cisco 2851 router chassis.
Details interface numbering conventions for Cisco 2801 series routers.
Details interface numbering for Cisco 2811, 2821, and 2851 routers.
Lists the technical specifications for the Cisco 2801 router.
Lists the technical specifications for the Cisco 2811 router.
Lists the technical specifications for the Cisco 2821 router.
Lists the technical specifications for the Cisco 2851 router.
Provides general safety guidelines to follow during the installation of Cisco 2800 series routers.
Outlines site requirements and considerations for installing Cisco 2800 series routers.
Discusses important precautions for planning an acceptable operating environment for routers.
Provides guidance on planning equipment rack configurations for Cisco 2800 series routers.
Offers a checklist of tasks and procedures for installing a new Cisco 2800 series router.
Explains how to maintain a Site Log for recording router installation and maintenance activities.
Provides instructions for unpacking and inspecting the Cisco 2800 series router upon arrival.
Lists the necessary tools and equipment for installing and maintaining Cisco 2800 series routers.
Discusses console and auxiliary port functionality and cabling for Cisco 2800 series routers.
Covers network connection considerations, including interface types and regulations.
Describes Ethernet implementations supported by Cisco 2800 series routers.
Explains serial connection types and requirements for Cisco 2800 series routers.
Explains how to connect AC or DC power to Cisco 2800 series routers.
Describes how to connect WAN, LAN, and voice interface cables to Cisco 2800 series routers.
Details procedures for connecting a console terminal or modem to Cisco 2800 series routers.
Covers the process of powering up Cisco 2800 series routers and initial checks.
Explains how to interpret front panel LED indicators during power up and operation.
Guides on configuring the Cisco 2800 series router using SDM, Setup Facility, or CLI.
Outlines the approach to solving problems by isolating issues in Cisco 2800 series routers.
Provides steps to troubleshoot power and cooling system issues in Cisco 2800 series routers.
Describes how the router reports environmental conditions like overtemperature.
Guides on troubleshooting issues related to modules, cables, and external connections.
Explains the meaning of system LEDs on Cisco 2800 series routers.
Explains the meaning of port and module LEDs on Cisco 2800 series routers.
Describes system error and recovery messages displayed by Cisco IOS software.
Provides information on recovering lost enable passwords for Cisco 2800 series routers.
Directs users to Cisco TAC for further troubleshooting assistance and tools.
Describes how to install slot dividers to adjust network module slot width.
Explains how to install and remove filler panels for network module slots.
Details how to install blank panels to cover empty chassis slots for proper airflow.
Describes how to install and remove slot dividers in HWIC slots.
Explains how to install blank panels for WAN and voice interface card slots.
Provides safety warnings related to installing and upgrading internal modules in routers.
Details the procedure for removing the chassis cover from Cisco 2800 series routers.
Shows the locations of DIMMs, AIMs, PVDMs, and power supplies within Cisco 2800 series routers.
Provides instructions for installing and removing DRAM DIMMs in Cisco 2800 series routers.
Details the procedure for installing and removing Advanced Integration Modules (AIMs).
Explains how to install and remove Packet Voice Data Modules (PVDMs).
Guides on replacing power supply units in Cisco 2800 series routers.
