Cisco Nexus 1000V - Page 254

25-10
Cisco Nexus 1000V Troubleshooting Guide, Release 5.2(1)SV3(1.1)
OL-31593-01
Chapter 25 VXLANs
VXLAN Troubleshooting Commands
Example 25-1 show system internal seg_bd info segment 10000
switch(config)# show system internal seg_bd info segment 10000
Bridge-domain: A
Port Count: 11
Veth1
Veth2
Veth3
Example 25-2 show system internal seg_bd info port vethernet 1
switch(config)# show system internal seg_bd info port vethernet 1
Bridge-domain: A
segment_id = 10000
Group IP: 225.1.1.1
Example 25-3 show system internal seg_bd info port ifindex 0x1c000050
switch(config)# show system internal seg_bd info port ifindex 0x1c000050
Bridge-domain: A
segment_id = 10000
Group IP: 225.1.1.1
Example 25-4 show system internal seg_bd info port_count
switch(config)# show system internal seg_bd info port_count
Number of ports: 11
Example 25-5 show system internal seg_bd info bd vxlan-home
switch(config)# show system internal seg_bd info bd vxlan-home
Bridge-domain vxlan-home (2 ports in all)
Segment ID: 5555 (Manual/Active)
Group IP: 235.5.5.5
State: UP Mac learning: Enabled
is_bd_created: Yes
current state: SEG_BD_FSM_ST_READY
pending_delete: 0
port_count: 2
action: 4
hwbd: 28
pa_count: 0
Veth2, Veth5
switch(config)#
Example 25-6 show system internal seg_bd info port
switch# show system internal seg_bd info port
if_index = <0x1c000010>
show system internal seg_bd info bd
vxlan-home
Displays the bridge domain internal configuration
See Example 25-5 on page 25-10
show system internal seg_bd info port Displays the VXLAN vEthernet information.
See Example 25-6 on page 25-10
Command Purpose