Cisco Nexus 3600 NX-OS - Page 114

switch(config-line)# access-class ozi2 out
switch(config-line)# exit
switch#
The following example shows how to remove the access restrictions on the VTY line:
switch# configure terminal
Enter configuration commands, one per line. End
with CNTL/Z.
switch(config)# line vty
switch(config-line)# no access-class ozi2 in
switch(config-line)# no ip access-class ozi2 in
switch(config-line)# exit
switch#
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
100
Configuring IP ACLs
Configuration Examples for ACLs on VTY Lines