Cisco Nexus 3600 NX-OS - Licensing Requirements for Acls; Prerequisites for Acls

•
Redirect_v6, RACL v4 cannot share TCAM with any other features.
•
After TCAM carving, you must reload the switch.
Table 11: TCAM Sizes by ACL Region
Default SizeTCAM ACL Region
1024PACL_IPv4 [ifacl]
1024PACL_IPV6 [ipv6-ifacl]
2048PACL_MAC [mac-ifacl]
640IPv4 Port QOS [qos]
256IPv6 Port QOS [ipv6-qos]
1024IPv4 RACL [racl]
1024IPv6 RACL [ipv6-racl]
640IPv4 L3 QoS [l3qos]
256IPv6 L3 QoS [ipv6-l3qos]
96SPAN [span]
128Ingress COPP [copp]
1024Redirect v4
2048Redirect v6
Licensing Requirements for ACLs
The following table shows the licensing requirements for this feature:
License RequirementProduct
No license is required to use ACLs.Cisco NX-OS
Prerequisites for ACLs
IP ACLs have the following prerequisites:
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
79
Configuring IP ACLs
Licensing Requirements for ACLs