Cisco Nexus 3600 NX-OS - Verifying the RADIUS Configuration; Displaying RADIUS Server Statistics; Clearing RADIUS Server Statistics

Verifying the RADIUS Configuration
To display AAA information, perform one of the following tasks:
PurposeCommand
Displays the RADIUS configuration in the
running configuration.
show running-config radius [all]
Displays the RADIUS configuration in the startup
configuration.
show startup-config radius
Displays all configured RADIUS server parameters.
show radius-server [server-name | ipv4-address |
ipv6-address] [directed-request | groups | sorted |
statistics]
Displaying RADIUS Server Statistics
Procedure
PurposeCommand or Action
Displays the RADIUS statistics.
switch# show radius-server statistics {hostname |
ipv4-address | ipv6-address}
Step 1
Clearing RADIUS Server Statistics
You can display the statistics that the Cisco NX-OS device maintains for RADIUS server activity.
Before You Begin
Configure RADIUS servers on the Cisco NX-OS device.
Procedure
PurposeCommand or Action
(Optional)
Displays the RADIUS server statistics on
the Cisco NX-OS device.
switch# show radius-server statistics {hostname
| ipv4-address | ipv6-address}
Step 1
Clears the RADIUS server statistics.
switch# clear radius-server statistics {hostname
| ipv4-address | ipv6-address}
Step 2
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
43
Configuring RADIUS
Verifying the RADIUS Configuration