Cisco Nexus 3600 NX-OS User Manual

Enable the ssh service? (yes/no) [y]: <CR>
Type of ssh key you would like to generate (dsa/rsa) : <CR>
Configure the ntp server? (yes/no) [n]: n
Configure default interface layer (L3/L2) [L3]: <CR>
Configure default switchport interface state (shut/noshut) [shut]: <CR>
Configure best practices CoPP profile (strict/moderate/lenient/dense/skip) [strict]:
strict
The following configuration will be applied:
password strength-check
no license grace-period
no telnet server enable
no system default switchport
system default switchport shutdown
policy-map type control-plane copp-system-p-policy
Would you like to edit the configuration? (yes/no) [n]: <CR>
Use this configuration and save it? (yes/no) [y]: y
switch#
Additional References for CoPP
This section provides additional information related to implementing CoPP.
Related Documents
Document TitleRelated Topic
Cisco NX-OS Licensing Guide
Licensing
Standards
TitleStandards
A Two Rate Three Color MarkerRFC 2698
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
140
Configuring Control Plane Policing
Additional References for CoPP

Cisco Nexus 3600 NX-OS Specifications

General

Brand	Cisco
Model	Nexus 3600 NX-OS
Category	Switch
Language	English