Cisco Nexus 5500 Series - Downloading the Default Initialization String

Downloading the Default Initialization String
The Cisco NX-OS software provides a default initialization string that you can download for connecting with
the modem. The default initialization string is ATE0Q1&D2&C1S0=1\015.
Before You Begin
Log in to the console port.
SUMMARY STEPS
1.
configure terminal
2.
Enter one of the following commands:
3.
modem init-string default
4.
exit
5.
(Optional) show line
6.
(Optional) copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enters global configuration mode.configure terminal
Example:
switch# configure terminal
switch(config)#
Step 1
Enter one of the following commands:
Step 2
DescriptionOption
Enters COM1 configuration mode.
line com1
Enters console configuration mode.
line console
Example:
switch# line com1
switch(config-com1)#
Writes the default initialization string to the
modem.
modem init-string default
Example:
switch(config-com1)# modem init-string default
Step 3
Exits COM1 or console configuration mode.exit
Example:
switch(config-com1)# exit
switch(config)#
Step 4
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
OL-30890-01 87
Configuring Terminal Settings and Sessions
Downloading the Default Initialization String