Cisco Nexus 5500 Series - Default Settings for File System Parameters; Additional References for Terminal Settings and Sessions; Related Documents for Terminal Settings and Sessions

PurposeCommand
Displays the COM1 and console ports settings.show line
Displays virtual terminal sessions.show users
Displays the user account configuration in the running
configuration. The all keyword displays the default
values for the user accounts.
show running-config [all]
For detailed information about the fields in the output from these commands, see the Cisco Nexus command
reference guide for your device.
Default Settings for File System Parameters
This table lists the default settings for the file system parameters.
Table 15: Default File System Settings
DefaultParameters
bootflash:Default filesystem
Additional References for Terminal Settings and Sessions
This section includes additional references for terminal settings and sessions on NX-OS devices.
Related Documents for Terminal Settings and Sessions
Document TitleRelated Topic
Cisco NX-OS Licensing Guide
Licensing
Cisco Nexus 5000 Series Command Reference
Command reference
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
OL-30890-01 91
Configuring Terminal Settings and Sessions
Default Settings for File System Parameters