Cisco Nexus 5500 Series - Copying Configuration Files to an Internal File System

SUMMARY STEPS
1.
(Optional) dir {slot0: | usb1: | usb2:}[directory/]
2.
copy {slot0: | usb1: | usb2:}[directory /]filename startup-config
3.
(Optional) show startup-config
DETAILED STEPS
PurposeCommand or Action
(Optional)
Displays the files on the external flash memory device.
dir {slot0: | usb1: | usb2:}[directory/]
Example:
switch# dir slot0:
Step 1
Copies the startup configuration from an external flash
memory device. The filename argument is case sensitive.
copy {slot0: | usb1: | usb2:}[directory /]filename
startup-config
Example:
switch# copy slot0:dsn-config.cfg startup-config
Step 2
(Optional)
Displays the startup configuration.
show startup-config
Example:
switch# show startup-config
Step 3
Related Topics
Copying Files, on page 119
Copying Configuration Files to an Internal File System
You can copy configuration files to the internal memory as a backup for later use.
SUMMARY STEPS
1.
copy running-config [filesystem:][directory/] | [directory/]filename
2.
copy startup-config [filesystem:][directory/] | [directory/]filename
DETAILED STEPS
PurposeCommand or Action
Copies the running-configuration file to internal memory.
copy running-config [filesystem:][directory/] |
[directory/]filename
Step 1
The filesystem, directory, and filename arguments are case
sensitive.
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
OL-30890-01 131
Working with Configuration Files
Copying Configuration Files to an Internal File System