Cisco Nexus 9000 Series - Troubleshooting Tools and Methodology; Command-Line Interface Troubleshooting Commands

CHAPTER 17
Troubleshooting Tools and Methodology
This chapter contains the following sections:
•
Command-Line Interface Troubleshooting Commands, page 93
•
Configuration Files, page 95
•
CLI Debug, page 95
•
Ping and Traceroute, page 96
•
Monitoring Processes and CPUs, page 98
•
Using Onboard Failure Logging, page 100
•
Using Diagnostics, page 101
•
Using Embedded Event Manager, page 102
•
Using Ethanalyzer, page 102
•
SNMP and RMON Support, page 104
•
Using the PCAP SNMP Parser, page 104
•
Using RADIUS, page 106
•
Using syslog, page 106
•
Using SPAN, page 108
•
Using the Blue Beacon Feature, page 108
•
Using the watch Command, page 108
•
Additional References for Troubleshooting Tools and Methodology, page 109
Command-Line Interface Troubleshooting Commands
The command-line interface (CLI) allows you to configure and monitor Cisco NX-OS using a local console
or remotely using a Telnet or Secure Shell (SSH) session. The CLI provides a command structure similar to
Cisco IOS software, with context-sensitive help, show commands, multiuser support, and roles-based access
control.
Cisco Nexus 9000 Series NX-OS Troubleshooting Guide, Release 7.x
93