Cisco Nexus 9000 Series - RMA Chassis Errors or License Transfers between Systems; License Listed as Missing

Recommended Action: Reinstall the correct license for the chassis where the supervisor
module is installed.
When entering the chassis serial number during the license ordering process, do not use the letter "O"
instead of any zeros in the serial number.
Note
RMA Chassis Errors or License Transfers Between Systems
A license is specific to the system for which it is issued and is not valid on any other system. If you need to
transfer a license from one system to another, contact your technical support representative.
License Listed as Missing
After a license is installed and operating properly, it might show up as missing if you modify your system
hardware or encounter a bootflash: issue.
SolutionsPossible CausesSymptom
See Corrupted Bootflash Recovery, on
page 15 to recover from the corrupted
bootflash:. Reinstall the license.
The supervisor module was replaced after
the license was installed.
A license is listed as
missing.
The supervisor bootflash: is corrupted.
Cisco Nexus 9000 Series NX-OS Troubleshooting Guide, Release 7.x
36
Troubleshooting Licensing Issues
RMA Chassis Errors or License Transfers Between Systems