Cisco Nexus 9504 - Displaying the Hardware Inventory for a Switch; Displaying Fabric Utilization Information

CLEI code is
switch#
Displaying the Hardware Inventory for a Switch
You can display information about the field replaceable units (FRUs), including product IDs, serial numbers,
and version IDs by using the show inventory command. The output for this command displays information
about modules that respond to command line interface commands. Modules such as supervisors, system
controllers, line cards, fans, fabric modules, and power supplies. But does not display information for modules
that do not respond to those commands, such as blank modules that cover empty slots to manage airflow.
switch# show inventory
NAME: "Chassis", DESCR: "Nexus9000 C9504 (4 Slot) Chassis"
PID: N9K-C9504 , VID: V01 , SN: FOX2150PHQU
NAME: "Slot 2", DESCR: "16x400G Ethernet Module"
PID: N9K-X9716D-GX , VID: V01 , SN: FOC24322R8V
NAME: "Slot 3", DESCR: "36x100G Ethernet Module"
PID: N9K-X9736C-EX , VID: V01 , SN: FOC23465C14
NAME: "Slot 22", DESCR: "4-slot Fabric Module"
PID: N9K-C9504-FM-G , VID: V00 , SN: FOC24432RQ9
NAME: "Slot 23", DESCR: "4-slot Fabric Module"
PID: N9K-C9504-FM-G , VID: V00 , SN: FOC24432RQ5
NAME: "Slot 24", DESCR: "4-slot Fabric Module"
PID: N9K-C9504-FM-E , VID: V02 , SN: FOC24294DUB
NAME: "Slot 25", DESCR: "4-slot Fabric Module"
PID: N9K-C9504-FM-G , VID: V00 , SN: FOC24432RRW
NAME: "Slot 28", DESCR: "Supervisor Module"
PID: N9K-SUP-B , VID: V02 , SN: FOC211761M5
NAME: "Slot 30", DESCR: "System Controller"
PID: N9K-SC-A , VID: V01 , SN: FOC22040SGR
NAME: "Power Supply 3", DESCR: "Nexus9000 C9504 (4 Slot) Chassis Power Supply"
PID: N9K-PAC-3000W-B , VID: V03 , SN: DTM220700SY
NAME: "Power Supply 4", DESCR: "Nexus9000 C9504 (4 Slot) Chassis Power Supply"
PID: N9K-PAC-3000W-B , VID: V03 , SN: DTM220700T3
NAME: "Fan 2", DESCR: "Nexus9000 C9504 (4 Slot) Chassis Fan Module"
PID: N9K-C9504-FAN , VID: V01 , SN: FOX2149P6Y3
NAME: "Fan 3", DESCR: "Nexus9000 C9504 (4 Slot) Chassis Fan Module"
PID: N9K-C9504-FAN , VID: V01 , SN: FOX2414P24S
switch#
Displaying Fabric Utilization Information
You can display information about hardware capacity in the module by using the show hardware capacity
command. This information includes total fabric bandwidth, utilization ingress and egress, module type,
Cisco Nexus 9504 NX-OS Mode Switch Hardware Installation Guide
49
Managing the Switch
Displaying the Hardware Inventory for a Switch