Cisco ONS 15454 SDH - Monitoring and Verifying IRB; Configuring IRB

12-4
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Chapter 12 Configuring IRB
Monitoring and Verifying IRB
!
interface POS0
no ip address
crc 32
bridge-group 1
pos flag c2 1
!
interface POS1
no ip address
crc 32
bridge-group 1
pos flag c2 1
!
interface BVI1
ip address 192.168.1.1 255.255.255.0
!
router ospf 1
log-adjacency-changes
network 192.168.1.0 0.0.0.255 area 0
network 192.168.2.0 0.0.0.255 area 0
Example 12-2 Configuring Router B
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
!
!
interface FastEthernet0
ip address 192.168.3.1 255.255.255.0
!
interface POS0
no ip address
crc 32
bridge-group 1
pos flag c2 1
!
interface POS1
no ip address
crc 32
bridge-group 1
pos flag c2 1
!
interface BVI1
ip address 192.168.1.2 255.255.255.0
!
router ospf 1
log-adjacency-changes
network 192.168.1.0 0.0.0.255 area 0
network 192.168.3.0 0.0.0.255 area 0
Monitoring and Verifying IRB
Table 12-1 shows the privileged EXEC commands for monitoring and verifying IRB.