Cisco ONS 15454 SDH - Figure 14-9 ML-Series Cos Example

14-23
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Chapter 14 Configuring Quality of Service
ML-Series CoS-Based QoS Example
Figure 14-9 ML-Series CoS Example
Example 14-14 shows the code used to configure ML-Series card A in Figure 14-9.
Example 14-14 ML-Series Card A Configuration (Customer Access Point)
ML_Series_A(config)# cos commit 2
ML_Series_A(config)# policy-map Fast5_in
ML_Series_A(config-pmap)# class class-default
ML_Series_A(config-pmap-c)# police 5000 8000 8000 pir 10000 conform-action
set-cos-transmit 2 exceed-action set-cos-transmit 1 violate-action drop
Example 14-15 shows the code used to configure ML-Series card B in Figure 14-9.
Example 14-15 ML-Series Card B Configuration (Not Customer Access Point)
ML_Series_B(config)# cos commit 2
Example 14-16 shows the code used to configure ML-Series card C in Figure 14-9.
Example 14-16 ML-Series Card C Configuration (Customer Access Point)
ML_Series_B(config)# cos commit 2
ML_Series_B(config)# policy-map Fast5_in
ML_Series_B(config-pmap)# class class-default
ML_Series_B(config-pmap-c)# police 5000 8000 8000 pir 10000 conform-action
set-cos-transmit 2 exceed-action set-cos-transmit 1 violate-action drop
RPR
POS 1 POS 0
POS 0
POS 0
POS 1
POS 1
= STS circuit created on CTC
ML-Series Card B
96501
ML-Series Card C
Customer Access Point
ML-Series Card A
Customer Access Point