Cisco ONS 15454 SDH - Perform a Terminal (Inward) Loopback on a Destination Electrical Port (West to East)

Figures
xxi
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Figure 21-1 Remote Monitoring Example 21-2
Figure 21-2 Wrapped Cisco proprietary RPR with Unidirectional Excessive CRC Errors 21-9
Figure 21-3 Unwrapped Cisco proprietary RPR with Unidirectional Excessive CRC Errors 21-10
Figure 21-4 Wrapped Cisco proprietary RPR with Bidirectional Excessive CRC Errors 21-11
Figure 21-5 First Stage of Unwrapped Cisco proprietary RPR with Bidirectional Excessive CRC Errors 21-12
Figure 21-6 Second Stage of Unwrapped Cisco proprietary RPR with Bidirectional Excessive CRC Errors 21-13
Figure 22-1 SNMP on the ML-Series Card Example 22-2
Figure 22-2 SNMP Network 22-4
Figure 23-1 Data Traffic on a G-Series Point-to-Point Circuit 23-3
Figure 23-2 G-Series Gigabit EtherChannel (GEC) Support 23-5
Figure 23-3 End-to-End Ethernet Link Integrity Support 23-5
Figure 23-4 G-Series Point-to-Point Circuit 23-7
Figure 23-5 G-Series Manual Cross-Connects 23-8
Figure 23-6 Card Level Overview of G-Series One-Port Transponder Mode Application 23-9
Figure 23-7 G-Series in Default SONET/SDH Mode 23-9
Figure 23-8 G-Series Card in Transponder Mode (Two-Port Bidirectional) 23-10
Figure 23-9 One-Port Bidirectional Transponder Mode 23-11
Figure 23-10 Two-Port Unidirectional Transponder 23-12
Figure 23-11 Multicard EtherSwitch Configuration 23-14
Figure 23-12 Single-Card EtherSwitch Configuration 23-14
Figure 23-13 E-Series Mapping Ethernet Ports to STS/VC Circuits 23-15
Figure 23-14 Edit Circuit Dialog Box Featuring Available VLANs 23-17
Figure 23-15 Q-tag Moving Through VLAN 23-18
Figure 23-16 Priority Queuing Process 23-20
Figure 23-17 STP Blocked Path 23-21
Figure 23-18 Spanning Tree Map on Circuit Window 23-21
Figure 23-19 Multicard EtherSwitch Point-to-Point Circuit 23-24
Figure 23-20 Single-Card EtherSwitch or Port-Mapped Point-to-Point Circuit 23-24
Figure 23-21 Shared Packet Ring Ethernet Circuit 23-25
Figure 23-22 Hub-and-Spoke Ethernet Circuit 23-26
Figure 24-1 CE-100T-8 Point-to-Point Circuit 24-1
Figure 24-2 Flow Control 24-3
Figure 24-3 End-to-End Ethernet Link Integrity Support 24-3
Figure 24-4 CE-100T-8 Allocation Tab for SDH 24-12
Figure 24-5 CE-100T-8 STS/VT Allocation Tab 24-13