Cisco ONS 15454 SDH - Page 297

17-39
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Chapter 17 Configuring Cisco Proprietary Resilient Packet Ring
RI for SW RPR Configuration Example
spr ri mode primary peer 1
spr ri foreign
no shutdown
Example 17-13 Secondary ML-Series Card Configuration with Connection to Switch
interface spr1
no ip address
spr topology discovery
spr ri mode primary peer 1
spr ri foriegn
no shutdown
Example 17-14 > Status of Redundant Interconnect can be found using
sh ons spr ri
ml1000-140#sh ons spr ri
Redundant Interconnect Data
Mode: primary
State: initialization
Peer: 1
Peer Active: false
Spans Provisioned : false
Topology: stable
Ring if: down
Interconnect if: up
Secondary IC mode: link-up, WTR-timer:60 Adjusted:61
Ucode mode: Active
Interconnect interface 0:
name: GigabitEthernet0
state: up
member port channel: false
Interconnect interface 1:
name: GigabitEthernet1
state: not up
member port channel: false
Monitored if: none