xxx
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
About this Guide
•
Chapter 17, “Configuring Cisco Proprietary Resilient Packet Ring,” provides resilient packet ring
(RPR) examples and procedures for the ML-Series card.
•
Chapter 18, “Configuring Ethernet over MPLS,” provides Ethernet over Multiprotocol Label
Switching (EoMPLS) examples and procedures for the ML-Series card.
•
Chapter 19, “Configuring Security for the ML-Series Card,” describes the security features of the
ML-Series card.
•
Chapter 20, “POS on ONS Ethernet Cards,” details and explains POS on Ethernet cards. It also
details Ethernet card interoperability.
•
Chapter 21, “Configuring RMON,” describes how to configure remote network monitoring (RMON)
on the ML-Series card.
•
Chapter 22, “Configuring SNMP,” describes how to configure the ML-Series card for operating with
Simple Network Management Protocol (SNMP).
•
Chapter 23, “E-Series and G-Series Ethernet Operation,” details and explains the features and
operation of E-Series and G-Series Ethernet cards for the ONS 15454, ONS 15454 SDH and
ONS 15327 platform.
•
Chapter 24, “CE-100T-8 Ethernet Operation,” details and explains the features and operation of
CE-100T-8 Ethernet card .
•
Chapter 25, “CE-1000-4 Ethernet Operation,” describes the operation of the CE-1000-4 card.
•
Appendix A, “Command Reference,” is an alphabetical listing of unique ML-Series card Cisco IOS
commands with definitions and examples.
•
Appendix B, “Unsupported CLI Commands,” is a categorized and alphabetized listing of Cisco IOS
commands that the ML-Series card does not support.
•
Appendix C, “Using Technical Support,” instructs the user on using the Cisco Technical Assistance
Center (Cisco TAC) for ML-Series card problems.
Related Documentation
Use the Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and
Configuration Guide, R8.0 in conjunction with the following general ONS 15454 or ONS 15454 SDH
system publications:
•
Cisco ONS 15454 Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 node and
network.
•
Cisco ONS 15454 SDH Procedure Guide
Provides procedures to install, turn up, provision, and maintain a Cisco ONS 15454 SDH node and
network.
•
Cisco ONS 15454 Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.
•
Cisco ONS 15454 SDH Reference Manual
Provides detailed card specifications, hardware and software feature descriptions, network topology
information, and network element defaults.
•
Cisco ONS 15454 Troubleshooting Guide
Provides alarm descriptions, alarm and general troubleshooting procedures, error messages, and
performance monitoring and SNMP parameters.
To Next Page
Loading...
