Cisco ONS 15454 SDH - Page 524

A-48
Cisco ONS 15454 and Cisco ONS 15454 SDH Ethernet Card Software Feature and Configuration Guide, R8.0
Appendix A Command Reference
show ons alarm
show ons alarm
Use this command to display all the active alarms on the ML-Series card running the Cisco IOS CLI
session.
Syntax Description This command has no arguments or keywords.
Defaults N/A
Command Modes Privileged exec
Usage Guidelines This command can be used to help diagnose and isolate card problems.
Examples
router# show ons alarm
Equipment Alarms
Active: CONTBUS-IO-A CTNEQPT-PBWORK
Port Alarms
POS0 Active: None
POS1 Active: None
FastEthernet0 Active: None
FastEthernet1 Active: None
FastEthernet2 Active: None
FastEthernet3 Active: None
FastEthernet4 Active: None
FastEthernet5 Active: None
FastEthernet6 Active: None
FastEthernet7 Active: None
FastEthernet8 Active: None
FastEthernet9 Active: None
FastEthernet10 Active: None
FastEthernet11 Active: None
POS0
Active Alarms : None
Demoted Alarms: None
POS1 VCG State: VCG_NORMAL
VCAT Group
Active Alarms : None
Demoted Alarms: None
Member 0
Active Alarms : None
Demoted Alarms: None
Member 1
Active Alarms : None
Demoted Alarms: None