Cisco RV 120W Administration Guide

Introduction
Connecting the Equipment
Cisco RV 120W Administration Guide 12
1
STEP 6 On the Cisco RV 120W, push in the ON/OFF POWER SWITCH button. The Setup
Wizard searches for the Cisco RV 120W.
The POWER LED on the front panel lights up green when the power adapter is
connected properly and the device is turned on.
Next:
• If your hardware connection is successful, but the Setup Wizard needs
more information about your Internet connection, the Enter Username and
Password window appears. (See Entering Login and Internet Connection
Information, page 13.)
• If your hardware connection is successful and the Setup Wizard
successfully detects your Internet connection, the Configure Router
window displays. (See Configuring Security, page 14.)

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English