Cisco RV 120W Administration Guide

Introduction
Viewing Device Statistics
Cisco RV 120W Administration Guide 23
1
• Firmware MD5 Checksum—The message-digest algorithm used to verify
the integrity of files.
• PID VID—Product ID and vendor ID of the device.
• CPU Usage—Percentage of CPU currently used.
• Memory Usage—Percentage of memory currently used.
LAN Information
• MAC Address—Hardware address.
• IPv4 Address—Address and subnet mask of the device.
• IPv6 Address—Address and subnet mask of the device (shown only if IPv6
is enabled).
• DHCP Server—Indicates if the device’s DHCP server is enabled or
disabled. If it is enabled, DHCP client machines connected to the LAN port
receive their IP address dynamically.
• DHCP Relay—Indicates if the device is acting as a DHCP relay (DHCP relay
must be enabled).
• DHCPv6 Server: Indicates if the device’s DHCPv6 server is enabled or
disabled. If it is enabled, DHCPv6 client machines connected to the LAN
port receive their IP address dynamically.
• DHCPv6 Server—Indicates if the device’s DHCPv6 server is enabled or
disabled. If it is enabled, DHCP client machines connected to the LAN port
receive their IP address dynamically.
WAN Information
The WAN Information provides the current status of the WAN interfaces. It
provides details about WAN interface and also provides actions that can be taken
on that particular WAN interface. The actions that can be taken differ with the
connection type. If WAN is configured using DHCP, the DHCP release renew
options are available, other connection types offer other options. The Dedicated
WAN Info displays information about the WAN port.
• MAC Address—MAC Address of the WAN port.
• Connection Time—Displays the time duration for which the connection is
up.

Cisco RV 120W Specifications

General

Brand	Cisco
Model	RV 120W
Category	Network Router
Language	English