Configuring the Firewall
Firewall Configuration Examples
Cisco RV180/RV180W Administration Guide 102
4
• Web server PC in the DMZ, IP address: 192.168.1.2
• Access to Web server: (simulated) public IP address 10.1.0.52
Example 4: Block traffic by schedule if generated from specific range of
machines
In this example, you want to block all HTTP traffic on the weekends if the request
originates from a specific group of machines in the LAN having a known range of
IP addresses, and anyone coming in through the Network from the WAN (i.e. all
remote users).
STEP 1 Setup a schedule. Choose Firewall > Advanced Settings > Schedules.
STEP 2 Click Add.
STEP 3 Enter the schedule name (for example, “Weekend”).
STEP 4 Under Time, check All Day.
STEP 5 Under Repeat, leave Everyday unchecked.
STEP 6 Check Saturday and Sunday.
STEP 7 Click Save.
Parameter Value
Connection Type Inbound
Action Always Allow
Service HTTP
Source IP Single Address
Start 10.1.0.52
Send to Local Server (DNAT IP) 192.168.1.2 (local IP address of your web server)
Rule Status Enabled
To Next Page
Loading...
Need help?
General
