Cisco SG350-10P Administration Guide

11
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 193
Smartport
This document describes the Smartports feature.
It contains the following topics:
•Overview
• How the Smartport Feature Works
• Auto Smartport
• Error Handling
• Default Configuration
• Relationships with Other Features
• Common Smartport Tasks
• Configuring Smartport Using The Web-based Interface
• Built-in Smartport Macros
Overview
The Smartport feature is designed to provide a means of quickly configuring network devices,
such as IP phones, printers, routers and Access Points (APs).
Using this feature, you create a “Smartport” macro, which is simply a script containing CLI
commands. These CLI commands specify the device configuration. After creating a Smartport
macro, it is applied to one or more devices. The result is that these devices share a common
configuration.
The Smartport feature works in conjunction with other features such as:
• Voice VLAN and Smartport, described in the Voice VLAN section.

Cisco SG350-10P Specifications

General

Product Name	Cisco SG350-10P
Category	Switch
Ports	10
PoE Ports	8
PoE Power Budget	62W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 3
Power Supply	Internal
Relative Humidity	10% to 90% non-condensing
MAC Address Table Size	8K
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Operating Altitude	Up to 3, 000 meters