EasyManuals Logo

Cisco SG350-10P Administration Guide

Cisco SG350-10P
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
General Information
Interface Naming Conventions
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 25
2
Interface Naming Conventions
Within the GUI, interfaces are denoted by concatenating the following elements:
Type of interface: The following types of interfaces are found on the various types of
devices:
- Fast Ethernet (10/100 bits)—These are displayed as FE. Supported only on the
350 family.
- Gigabit Ethernet ports (10/100/1000 bits)—These are displayed as GE.
Supported only on the 350 family
- Ten Gigabit Ethernet ports (1000/10,000 Mbps)—These are displayed as XG.
- Out-of-Band Port—This is displayed as OOB.
- LAG (Port Channel)—These are displayed as LAG.
- VLANThese are displayed as VLAN.
- Tunnel —These are displayed as Tunnel.
Unit Number—Number of the unit in the stack. The unit number together with the
interface number completely identifies the port. For example, GE1/0/4 is port number
4 on the first unit of the stack.
Slot Number—The slot number is always 0.
Interface Number: Port, LAG, Tunnel, or VLAN ID.

Table of Contents

Other manuals for Cisco SG350-10P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG350-10P and is the answer not in the manual?

Cisco SG350-10P Specifications

General IconGeneral
Product NameCisco SG350-10P
CategorySwitch
Ports10
PoE Ports8
PoE Power Budget62W
Switching Capacity20 Gbps
Forwarding Rate14.88 Mpps
LayerLayer 3
Power SupplyInternal
Relative Humidity10% to 90% non-condensing
MAC Address Table Size8K
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 70°C
Operating AltitudeUp to 3, 000 meters

Related product manuals