EasyManuals Logo

Cisco SG350-10P Administration Guide

Cisco SG350-10P
762 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #470 background imageLoading...
Page #470 background image
Security
RADIUS
Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4 327
17
Authentication Port—Enter the UDP port number of the RADIUS server port for
authentication requests.
Accounting Port—Enter the UDP port number of the RADIUS server port for
accounting requests.
Trap Settings
RADIUS Accounting Traps—Check to generate traps for RADIUS accounting events.
RADIUS Authentication Failure Traps—Check to generate traps for logins that
failed.
RADIUS Authentication Success Traps—Check to generate traps for logins that
succeeded.
STEP 3 Click Apply. The RADIUS default settings for the device are updated in the Running
Configuration file.
RADIUS Server Keys
To set the RADIUS server keys:
STEP 1 Click Security > RADIUS Server > RADIUS Server Keys.
STEP 2 Enter the default RADIUS keys if required. Values entered in the Default Key are applied to
all servers configured (in the Add RADIUS Server page) to use the default key.
Default Key—Enter the default key string used for authenticating and encrypting
between the device and the RADIUS client. Select one of the following options:
- Keep existing default key—For specified servers, the device attempts to
authenticate the RADIUS client by using the existing, default Key String.
- Encrypted—To encrypt communications by using MD5, enter the key in encrypted
form.
- Plaintext—Enter the key string in plaintext mode.
MD5 Digest—Displays the MD5 digest of the user-entered password.
STEP 3 Click Apply. The RADIUS default settings for the device are updated in the Running
Configuration file.
STEP 4 To add a secret key, click Add and enter the following fields:
NAS Address—Address of switch containing RADIUS client.

Table of Contents

Other manuals for Cisco SG350-10P

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco SG350-10P and is the answer not in the manual?

Cisco SG350-10P Specifications

General IconGeneral
Product NameCisco SG350-10P
CategorySwitch
Ports10
PoE Ports8
PoE Power Budget62W
Switching Capacity20 Gbps
Forwarding Rate14.88 Mpps
LayerLayer 3
Power SupplyInternal
Relative Humidity10% to 90% non-condensing
MAC Address Table Size8K
Operating Temperature0°C to 45°C
Storage Temperature-20°C to 70°C
Operating AltitudeUp to 3, 000 meters

Related product manuals