Cisco SG350-10P Administration Guide

Smart Network Application (SNA)
Services
526 Cisco 350, 350X and 550X Series Managed Switches, Firmware Release 2.4, ver 0.4
25
Power Management Policy (Device Level)
This service enables setting power policies for selected devices.
Current Configuration
For every selected device, the current power schedule parameters are displayed, as shown
below:
The following parameters are displayed:
• SNA Power Schedule (active/inactive)
• Power schedule details if active
• Whether time power is active each day, beginning on Monday and ending on Sunday
• Behavior of ports in off-schedule times. The options include:
- PoE power inactive
- Data inactive
- Both PoE power and data inactive
- Custom—Displayed if an SNA-created schedule is not applied uniformly to all
Access ports. Access ports are ports whose VLAN mode is Access.
- Configured ports—A list of all ports that are bound to the SNA-created schedule.

Cisco SG350-10P Specifications

General

Product Name	Cisco SG350-10P
Category	Switch
Ports	10
PoE Ports	8
PoE Power Budget	62W
Switching Capacity	20 Gbps
Forwarding Rate	14.88 Mpps
Layer	Layer 3
Power Supply	Internal
Relative Humidity	10% to 90% non-condensing
MAC Address Table Size	8K
Operating Temperature	0°C to 45°C
Storage Temperature	-20°C to 70°C
Operating Altitude	Up to 3, 000 meters