Phone.com Setup and Troubleshooting Guide
Cisco SPA303 IP Phone
Revised: May 28, 2014 Page 4 of 11
Using Your Phone
The Cisco Quick Start Guide already covers basics like placing or
answering calls, and putting a call on hold, but not these other
commonly used features.
Reviewing Your Call History
1. Press the (menu) button, then select the Call History
option.
2. Select Redial List, Answered Calls, or Missed Calls.
3. Scroll up and down to review the list of calls.
4. Scroll to the right to see the save softkey, which will save
that entry to your phone’s Directory.
Using Three–Way Conference Calls
Create a conference call at any time between an active call and a
call on hold. Conference calls are limited to three participants.
1. Place or answer your first call.
2. Press the conf softkey when you’re ready to place your
second call.
3. Press the confLx softkey when you're ready to join all calls
together.
Place your three–way conference call on hold and resume each call
independently.
1. Press the (hold) button. Your line key will flash red, and
the other two calls will hear hold music.
2. Press the line key to resume your first call.
3. Press the line key again to swap over to your second call.
4. Press the confLx softkey to resume the conference with all
lines.
To Next Page
Loading...
