Phone.com Setup and Troubleshooting Guide
Cisco SPA303 IP Phone
Revised: May 28, 2014 Page 5 of 11
End your three–way conference call using either of two methods.
1. Hang up to end the call for everyone.
2. Press the join softkey to drop out and let the other
participants continue.
Transferring Calls
Transfer calls to other extensions or phone numbers using your
Cisco SPA303 IP Phone.
1. Press the xfer softkey during a call to place it on hold.
2. Dial the transfer destination number.
3. Press the xfer key at any time to transfer the call — this
could be while you hear ringing, or after someone answers.
If you start the transfer process but change your mind, you can
resume your original call.
1. Press the cancel softkey. Your call to the transfer destination
will disconnect.
2. Press the line key to resume your original call.
Storing Personal Directory Entries
Store a list of Personal Directory Entries in your Cisco SPA303 IP
Phone for quick access. Press the dir softkey to access the options
to add to or search through the list.
Don’t forget you can add entries from your Call History lists using
the save softkey.
Additional Phone.com Features
Recording Incoming Calls
Record incoming calls using the Call Recording feature. Check
state, federal, and international laws for all parties involved before
using this feature.
To Next Page
Loading...
Need help?
General
