[Misc]
snapshotName = data_store_backup
passwordFile = /home/dbadmin/pw.ini
enableFreeSpaceCheck = True
retryCount = 2
retryDelay = 1
[Transmission]
encrypt = true
checksum = true
concurrency_backup = 2
concurrency_restore = 2
16.
Replace backup-host-ip with the backup host's IPaddress.
17.
If the host names under [Mapping] do not match your Data Nodes, update
these host names.
18.
Ensure that you have an entry for each Data Node if you deployed more than 3 to
your environment.
19.
Copy the updated lines and paste them into the config.ini file.
20.
Press Esc, then enter :wq, then press Enter to exit and save your changes.
21.
Enter vbr -t init -c config.ini and press Enter to initialize the
/home/dbadmin/backups directory on the backup host to receive Data Store
backups.
Backup the Data Store database
Before You Begin
l
As root, log into the console of the Data Node from which you initialized the
backup host directory, as described in Initialize the backup directory on the
backup host.
Procedure
1.
Enter su - dbadmin and press Enter to run the following commands as the
dbadmin user.
2.
Enter vbr -t backup -c config.ini --debug 3 --dry-run and press
Enter to perform a test of the backup without creating the backup. You have the
following options:
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 47 -
Data Store Maintenance
To Next Page
Loading...
Need help?
General
