Cisco Stealthwatch User Manual

Configure your new SMCor Flow Collectors for secure
communications with the Data Store
If you have new SMCs or Flow Collectors that you have not deployed, configure the
appliances for use with a Data Store, and add them to your deployment.
Procedure
1. Follow the steps in SMC Configuration for Use with a Data Store and Flow
Collector Configuration for Use with a Data Store to deploy your SMCor Flow
Collector, configure it for use with a Data Store, and use Appliance Setup Tool.
2.
Log into the primary SMCconsole as root.
3.
From the command prompt, enter SystemConfig and press Enter to access the
System Configuration utility.
4. Select Data Store.
5. Select Passwordless SSH. Wait several minutes for SystemConfig to enable
passwordless SSH across your appliances.
Check Central Management to ensure that all appliances are Up before continuing.
6. From the Data Store menu, select Config new SMC, FCs. Wait several minutes
for the system to recognize and add your SMC or Flow Collector.
Check Central Management to ensure that your newly added appliance is Up.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 56 -
Data Store Maintenance

Cisco Stealthwatch Specifications

General

Brand	Cisco
Model	Stealthwatch
Category	Storage
Language	English