l
Log into the appliance's console as sysadmin.
l Enter System Configuration.
Procedure
1.
Go to the root shell.
2. On the System Configuration menu, select Advanced, and then press Enter. The
Advanced menu appears.
3. Select RootShell, and then press Enter.
A prompt for the root password appears.
4. Type the current root password, and then press Enter. The root shell prompt
appears.
5. Type SystemConfig, and then press Enter.
This returns you to the System Configuration menu so that you can change the
root password.
6. Select Password, and then press Enter. The password prompt appears below the
menu.
7. Type the new root password, and then press Enter. A second prompt appears.
8. Retype the new root password, and then press Enter.
9. When your password change is successful, press Enter. You have now changed
both of your default sysadmin and root passwords. This returns you to the System
Configuration Console menu.
10. Select Cancel and press Enter. The System Configuration Console closes and the
root shell prompt appears.
11. Type exit and press Enter. The login prompt appears.
12. Press Ctrl+Alt to exit the Console environment.
You are now ready to configure your appliance. To configure your appliance, refer to the
applicable Stealthwatch System Configuration Guide for your software version. The
x2xx Series is compatible with Stealthwatch 7.x software versions.
© 2021 Cisco Systems, Inc. and/or its affiliates. All rights reserved. - 83 -
Appendix B.Stealthwatch Hardware Installation
To Next Page
Loading...
