Cisco TelePresence MX700 - Clearpath - Packet Loss Resilience

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
133
Cisco TelePresence MX700 and MX800 Administrator Guide
ClearPath — Packet loss resilience
ClearPath introduces advanced packet loss resilience
mechanisms that increase the experienced quality when you
use your video system in an error prone environment.
We recommend that you keep ClearPath enabled on your
video system.
Go to the System Configuration page (web interface):
• Navigate to Conference 1 > PacketLossResilience > Mode
Choose Off to disable ClearPath and On to enable
ClearPath.
Contents
Introduction
Web interface
System settings
Setting passwords
AppendicesAppendices