Cisco TelePresence MX700 - Description of the xConfiguration commands

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
32
Cisco TelePresence MX700 and MX800 Administrator Guide
Choosing a ringtone
You can choose from a set of predefined ringtones. The
chosen ringtone can be played back from this page.
The ringtone will be played back on the video system
itself, and not through the web interface.
Changing ringtone
Choose a ringtone from the drop-down list,
and click Save to make it the active ringtone.
Playing back the ringtone
Click the play button ( ► ) to play back the ringtone.
Use the stop button ( ) to end the playback.
Navigate to: Configuration > Personalization
Set the ringtone volume
Use the slide bar to adjust the ringtone volume.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface