Cisco TelePresence MX700 - Backup and Restore

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
51
Cisco TelePresence MX700 and MX800 Administrator Guide
Backup and restore
All the system settings, which are available on the System
configuration page, can be listed on-screen or stored as a
text file.
The text file can be loaded back onto the system, thereby
restoring the configuration.
Backing up or showing the current configuration
Click Preview backup to display the current
settings on-screen.
Click Take backup to store the configuration
as a text file.
Restoring an earlier configuration
Click Browse... and find the file with the
configuration you want to restore.
Click Restore to reconfigure the system as
defined in the file.
Navigate to: Maintenance > Backup and Restore
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface