Cisco TelePresence MX700 Administrator's Guide

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
21
Cisco TelePresence MX700 and MX800 Administrator Guide
Navigate to: Call Control
Controlling your camera
You can control the camera from the Call Control page.
The camera controls (pan, tilt, zoom) are available when
the cursor is placed in the Main Source video area. Live
snapshots are automatically taken during this period.
Note that the camera controls are not available if the system
is in standby mode.
Pan and tilt
Use the left and right arrows
to pan the camera, and the up
and down arrows to tilt it.
Zoom
Use + and - to zoom in and out.
Choose which camera to control
Click the arrow to open the
drop-down list. Then choose the
camera you want to control.
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Web interface

Cisco TelePresence MX700 Specifications

General

Product Type	Video conferencing system
Frame Rate	Up to 60 fps
Display	Dual 55-inch LCD
Audio	Integrated speakers and microphones
Video Standards	H.264
Network	Ethernet
Connectivity	HDMI, USB
Control	Touch 10 control unit
Video Resolution	1080p at 60 fps
Zoom	12x optical zoom
Codec	H.264
Network Protocols	SIP
Power Consumption	300W
Weight	90 kg