Cisco TelePresence MX700 - RTP Settings

D15119.02 MX700 and MX800 Administrator Guide TC7.2, AUGUST 2014. www.cisco.com — Copyright © 2014 Cisco Systems, Inc. All rights reserved.
94
Cisco TelePresence MX700 and MX800 Administrator Guide
RTP settings
RTP Ports Range Start
Specify the first port in the range of RTP ports. Also see the H323 Profile [1..1] PortAllocation
setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1024..65438>
Range: Select a value from 1024 to 65438.
Example:
RTP Ports Range Start: 2326
RTP Ports Range Stop
Specify the last RTP port in the range. Also see the H323 Profile [1..1] PortAllocation setting.
NOTE: Restart the system for any change to this setting to take effect.
Requires user role: ADMIN
Value space: <1120..65535>
Range: Select a value from 1120 to 65535.
Example:
RTP Ports Range Stop: 2486
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings